Incoloy 800H Filler Wire
Metracore Alloys Private Limited supplies Incoloy 800H filler wire to fabricators, EPC contractors and plant maintenance teams working on high-temperature equipment. Stock covers TIG cut lengths and spooled MIG wire. Incoloy 800H is a nickel-iron-chromium alloy developed for high-temperature structural service, with nickel at 30.0 to 35.0% and chromium at 19.0 to 23.0%. Carbon is held between 0.05 and 0.10%, and the parent material receives a high-temperature anneal that produces an ASTM grain size of 5 or coarser.
Those two controls give 800H base metal its creep strength above 600°C, and the filler is chosen so the deposit keeps up with it. Chromium builds the oxide film that resists scaling, and nickel slows carbon pick-up in carburising atmospheres. Consumables are ordered to match N08810 chemistry or the nickel-base classification ERNiCr-3. Petrochemical, power, heat treatment and furnace work account for most demand. Every lot leaves with a material test certificate that traces the wire back to its melt.
WHY CHOOSE METRACORE ALLOYS FOR INCOLOY 800H FILLER WIRE?
Metracore Alloys Private Limited stocks Incoloy 800H filler wire as TIG cut lengths and spooled MIG diameters, drawn from certified heats. Chemistry on each lot is verified before dispatch, and the certificate carries the heat number to the packing list. Consumables are left sealed because surface contamination on nickel wire causes porosity. Supply covers dispatch within India alongside export consignments. Send your welding procedure with the enquiry so the right classification is quoted the first time.
- Incoloy 800H Filler Wire Specification
- Incoloy 800H Filler Wire Types
- Technical Details of Incoloy 800H Filler Wire
- Chemical Composition of Incoloy 800H Filler Wire
- Properties of Incoloy 800H Filler Wire
- Incoloy 800H Filler Wire Standards
- Manufacturing Process of Incoloy 800H Filler Wire
- Applications of Incoloy 800H Filler Wire
- Incoloy 800H Filler Wire FAQs
Incoloy 800H Filler Wire Specification
Standards
AWS A5.14 ERNiCr-3
ASME SFA-5.14
EN ISO 18274
UNS N08810
Wire Diameter
0.8 mm to 3.2 mm
Product Type
Filler Wire / Filler Rod
Types of Incoloy 800H Filler Wire
Four supply formats cover 800H welding work: TIG filler wire, MIG welding wire, straight-length filler rods and general welding wire.
Incoloy 800H TIG Filler Wire
Incoloy 800H MIG Welding Wire
Incoloy 800H Filler Rods
Incoloy 800H Welding Wire
Reach out to Metracore Alloys Private Limited for reliable Incoloy 800H filler wire solutions
Technical Details of Incoloy 800H Filler Wire
Chemical Composition of Incoloy 800H Filler Wire
Matching-composition 800H wire follows the element limits set for the N08810 wrought product.
| Element | Content (%) |
| Nickel | 30.0–35.0 |
| Chromium | 19.0–23.0 |
| Iron | 39.5 min |
| Carbon | 0.05–0.10 |
| Aluminium | 0.15–0.60 |
| Titanium | 0.15–0.60 |
| Aluminium + Titanium | 0.30–1.20 |
| Manganese | 1.50 max |
| Silicon | 1.00 max |
| Sulphur | 0.015 max |
| Copper | 0.75 max |
Properties of Incoloy 800H Filler Wire
Eight characteristics determine where 800H consumables are specified.
- High-temperature strength: Deposits carry a load where stainless weld metal softens.
- Creep resistance: Coarse grains resist boundary sliding under stress.
- Stress-rupture resistance: Controlled carbon extends rupture life.
- Oxidation resistance: The chromium oxide film reforms after each cycle.
- Carburisation resistance: High nickel lowers carbon diffusion inward.
- Nitridation resistance: The oxide barrier restricts nitrogen ingress.
- Thermal stability: The matrix stays austenitic through long exposure, so the deposit resists the embrittlement that affects many stainless weld metals.
- Prolonged elevated-temperature service: Properties survive years of operation.
Incoloy 800H Filler Wire Grade & Designations
Incoloy 800H carries UNS N08810, and carbon plus grain size separates it from alloy 800 and alloy 800HT.
- Incoloy 800H: The grade name identifies the controlled-carbon, coarse-grain version of alloy 800. Carbon of 0.05 to 0.10% defines it, together with an ASTM grain size of 5 or coarser on the annealed wrought product.
- UNS N08810: This number fixes 800H chemistry across wrought forms, wire included. Mill certificates quote it rather than the trade name.
- W.Nr. 1.4958: The European material number for 800H. Alloy 800HT carries 1.4959, and Alloy 800 carries 1.4876, so they shouldn’t be substituted.
- AWS A5.14 ERNiCr-3 (UNS N06082): A5.14 holds no classification matching N08810 chemistry. Where a nickel-base filler is acceptable, ERNiCr-3 is specified instead.
- ASME SFA-5.14: The ASME adoption of AWS A5.14, published in Section II, Part C. ERNiCr-3 carries F-No. 43 under Section IX, which is the grouping welders qualify against.
Incoloy 800H Filler Wire Standards
The filler form, process, base material and service temperature decide which document applies.
- UNS N08810 fixes chemistry for matching-composition wire and rod.
- W.Nr. 1.4958 performs the same role on European certificates.
- AWS A5.14 classifies bare nickel-alloy rods, ERNiCr-3 included.
- ASME SFA-5.14 reproduces A5.14 for pressure vessel work.
- EN ISO 18274 lists ERNiCr-3 as S Ni 6082 (NiCr20Mn3Nb).
- Project specifications add sulfur limits or extra testing.
Incoloy 800H Filler Wire Sizes
Diameter selection follows the welding process rather than joint thickness alone.
- Wire diameter: 0.8 mm, 1.0 mm, 1.2 mm for GMAW
- Filler rod diameter: 1.6 mm, 2.0 mm, 2.4 mm, 3.2 mm for GTAW
- Spool size: 5 kg and 15 kg
- Coil size: 25 kg
- Straight lengths: 1000 mm in 5 kg bundles
Manufacturing Process of Incoloy 800H Filler Wire
Applications of Incoloy 800H Filler Wire
Products
Exporter, Manufacturer & Supplier of Incoloy 800H Filler Wire in various material and sizes.
Incoloy 800H Filler Wire FAQs
What Filler Wire Is Used For Welding Incoloy 800H?
AWS A5.14 ERNiCr-3 covers most 800H welding. Matching UNS N08810 wire is used where the deposit must reproduce base-metal chemistry.
What Is The Difference Between Incoloy 800 And 800H Filler Wire?
What Are The Main Properties Of Incoloy 800H Filler Wire?
Five properties matter most: high-temperature strength, creep and stress-rupture resistance, oxidation resistance, carburisation resistance, and thermal stability.
What Sizes Of Incoloy 800H Filler Wire Are Available?
TIG rods measure 1.6 mm to 3.2 mm, and MIG spool wire is 0.8 mm to 1.2 mm. Cut lengths are 1000 mm.
Can Incoloy 800H Filler Wire Be Used For TIG Welding?
GTAW handles most 800H joints. Low heat input and narrow beads keep the cracking risk down.
Can Incoloy 800H Filler Wire Be Used For MIG Welding?
Spooled wire feeds GMAW torches well, though nickel weld metal doesn’t wet like carbon steel.
Where Is Incoloy 800H Filler Wire Used?
Ethylene crackers, steam reformers, industrial furnaces and heat-treatment fixtures consume the bulk of it.
What Standards Apply To Incoloy 800H Filler Wire?
AWS A5.14 and ASME SFA-5.14 classify the nickel-base filler. EN ISO 18274 covers the same wire in Europe.
What Certificates Are Supplied With Incoloy 800H Filler Wire?
A material test certificate showing heat number, chemical analysis and test results accompanies each lot.
How Can I Buy Incoloy 800H Filler Wire From Metracore Alloys Private Limited?
Send the grade, diameter, form and quantity with your welding procedure. A quotation follows against current stock.