Inconel 690 Filler Wire
Metracore Alloys Private Limited manufactures and supplies Inconel 690 filler wire to fabricators, EPC contractors and plant maintenance teams across India and overseas markets. We stock TIG filler rods and MIG spooled wire from 0.8 mm to 3.2 mm diameter, plus straight lengths cut to 915 mm and 1000 mm.
Inconel 690 filler wire is a nickel-chromium-iron welding consumable used to join and repair Inconel 690 and compatible nickel-alloy components. The base alloy carries the designation UNS N06690 and the material number W. Nr. 2.4642. Its matching filler classifies under AWS A5.14 as ERNiCrFe-7, holding chromium between 28.0 and 31.5%.
Chromium at that level explains the specification. The deposit resists oxidation in hot gas, withstands oxidising acids such as nitric acid, and holds up against stress-corrosion cracking in high-purity water.
GTAW and GMAW are the two processes this classification supports. Nuclear steam generator work, chemical processing plants, petrochemical equipment and heat exchangers account for most of the enquiries we handle. Send us your welding procedure specification, and we’ll confirm the matching classification before you order.
Why Choose Metracore Alloys Private Limited for Inconel 690 Filler Wire?
Metracore Alloys Private Limited holds ERNiCrFe-7 filler wire in TIG-rod and MIG-spool form across the 0.8 mm to 3.2 mm band, with coil and cut-length supply arranged on request. Bulk quantities and part-lot releases go through the same order desk. We arrange export packing for overseas project sites alongside domestic delivery.
Documentation moves with the material. Each lot carries a mill test certificate recording composition, heat number and lot number, so traceability holds from receipt through inspection. We check analysis against AWS A5.14 limits before dispatch, verify dimensions on the drawn wire, and issue a Certificate of Conformity where the contract asks for one.
- Inconel 690 Filler Wire Specification
- Types of Inconel 690 Filler Wire
- Inconel 690 Filler Wire Grade & Designations
- Technical Details of Inconel 690 Filler Wire
- Chemical Composition of Inconel 690 Filler Wire
- Inconel 690 Filler Wire Standards
- Inconel 690 Filler Wire Sizes
- Inconel 690 Filler Wire Welding Processes
- Manufacturing Process of Inconel 690 Filler Wire
- Inconel 690 Filler Wire Application
- Inconel 690 Filler Wire FAQs
Inconel 690 Filler Wire Specification
Standards
AWS A5.14 ERNiCrFe-7
UNS N06690 (Base)
UNS N06052 (Filler)
ISO 18274 S Ni 6052
Straight Length
915 mm to 1000 mm(36 in. to 39 in.)
Product Type
Filler Wire / Filler Rod
Types of Inconel 690 Filler Wire
Inconel 690 TIG Filler Wire
Inconel 690 MIG Welding Wire
ERNiCrFe-7 Filler Wire
Inconel 690 Filler Rod
Inconel 690 Filler Wire Grade & Designations
Reach out to Metracore Alloys Private Limited for ready stock of Inconel 690 Filler Wire
Technical Details of Inconel 690 Filler Wire
Chemical Composition of Inconel 690 Filler Wire
| Element | Composition (%) |
| Chromium (Cr) | 28.0 – 31.5 |
| Iron (Fe) | 7.0 – 11.0 |
| Carbon (C) | 0.04 max |
| Manganese (Mn) | 1.0 max |
| Silicon (Si) | 0.50 max |
| Sulphur (S) | 0.015 max |
| Phosphorus (P) | 0.02 max |
| Copper (Cu) | 0.30 max |
| Molybdenum (Mo) | 0.50 max |
| Titanium (Ti) | 1.0 max |
| Aluminium (Al) | 1.10 max |
| Aluminium + Titanium | 1.5 max |
| Niobium + Tantalum | 0.10 max |
| Others, total | 0.50 max |
| Nickel + Cobalt (Ni+Co) | Remainder |
The limits above apply to ERNiCrFe-7 filler metal under AWS A5.14, not to the base alloy. Inconel 690 plate and pipe carry nickel at 58.0% minimum, chromium from 27.0 to 31.0%, and iron from 7.0 to 11.0%. The filler lifts chromium higher and holds residuals tighter, since weld metal must resist cracking after dilution.
Inconel 690 Filler Wire Specifications
| Specification | Details |
| Material | Nickel-Chromium-Iron Alloy |
| Base Alloy | Inconel 690 |
| UNS (Base Metal) | N06690 |
| Product | Filler Wire / Filler Rod |
| Filler Classification | ERNiCrFe-7 (UNS N06052) |
| Welding Process | TIG/GTAW, MIG/GMAW |
| Wire Diameter | 0.8 mm to 3.2 mm |
| Form | Spool, Straight Length; coil against order |
| Standard | AWS A5.14 / ASME SFA-5.14 |
| ASME Section IX Group | F-No. 43 |
| Surface | Clean, bright drawn |
| Testing | Chemical analysis, dimensional check |
| Certification | MTC, Certificate of Conformity |
Properties of Inconel 690 Filler Wire
| Property | Details |
| High chromium content | Chromium held at 28.0 to 31.5% sits above what most nickel-alloy consumables carry. |
| Oxidation resistance | The deposit keeps a protective chromium oxide film in hot gas, limiting scale at elevated service temperatures. |
| Corrosion resistance in oxidising acids | Nitric acid and mixed-acid duty suit the weld metal, which is why acid plant fabricators call for it. |
| Stress-corrosion cracking resistance | High-purity water at reactor conditions attacks lower-chromium weld metal. This classification was developed against exactly that problem. |
| High-temperature performance | Hot-section assemblies carry load through the joint without loss of fusion-zone integrity. |
| Metallurgical stability | Carbon at 0.04% max holds down solidification cracking. Low niobium does too, at the cost of ductility-dip resistance on restrained multi-pass work. |
| Ductility after welding | A tensile strength of 552 MPa minimum at 30% elongation leaves the joint able to absorb strain. |
Inconel 690 Filler Wire Standards
Consumable standards, not base-metal standards, govern a filler wire order.
- AWS A5.14: classifies ERNiCrFe-7 and fixes its chemistry, dimensions and packaging.
- ASME SFA-5.14: the Section II Part C adoption of AWS A5.14, cited on code-stamped work.
- ASME Section IX, F-No. 43: the grouping welder and procedure qualifications reference.
- ISO 18274: the international specification listing S Ni 6052.
- Project specifications: owner and licensor documents add limits on cobalt content or lot testing.
Base material, welding process, joint configuration and service conditions decide the correct classification. Nuclear work carries a caution: ERNiCrFe-7 wire isn’t nuclear-qualified by classification alone, and manufacture to ASME III needs project-specific verification.
Inconel 690 Filler Wire Sizes
Standard diameters for this classification are 0.8, 0.9, 1.0, 1.14, 1.2, 1.6, 2.4, and 3.2 mm.
The TIG filler rod moves mostly in the 1.6 mm to 3.2 mm band, cut to 915 mm or 1000 mm. MIG wire covers 0.8 mm to 1.2 mm on spools, while coil supply feeds automated cladding. Non-standard sizes and pack weights are available against order.
Inconel 690 Filler Wire Standards
Inconel 690 Filler Wire Welding Processes
Inconel 690 Filler Wire Sizes
Inconel 690 Filler Wire Welding Processes
Inconel 690 Filler Wire Welding Processes
Inconel 690 Filler Wire Application
Inconel 690 Filler Wire FAQs
Products
Exporter, Manufacturer & Supplier of Inconel 690 Filler Wire in various sizes and forms.
Inconel 690 Filler Wire FAQs
What Filler Wire Is Used for Welding Inconel 690?
ERNiCrFe-7 is the AWS A5.14 classification for welding Inconel 690 to itself, to steels and for overlay on steel.
What Is ERNiCrFe-7 Filler Wire?
ERNiCrFe-7 is a nickel-chromium-iron bare rod and solid wire under AWS A5.14, carrying UNS N06052. Nominal chemistry is 60% nickel, 29% chromium, and 9% iron.
Can Inconel 690 Filler Wire Be Used for TIG Welding?
Yes. GTAW is one of the two processes AWS lists, with 1.6 mm to 3.2 mm rods covering manual work.
Does the Same Wire Suit MIG Welding?
GMAW is supported by the same classification. Spooled diameters of 0.8 mm to 1.2 mm suit fill passes and overlay cladding.
What Sizes of Inconel 690 Filler Wire Are Available?
Standard diameters are 0.8, 0.9, 1.0, 1.14, 1.2, 1.6, 2.4, and 3.2 mm, with straight lengths at 915 mm or 1000 mm.
Where Is Inconel 690 Filler Wire Used?
Nuclear steam generator work takes the largest volume. Chemical processing, nitric acid plant equipment and heat exchangers follow.
Which Standards Apply to Inconel 690 Filler Wire?
AWS A5.14 and ASME SFA-5.14 classify the consumable, ASME Section IX groups it as F-No. 43, and ISO 18274 lists S Ni 6052.
What Certificates Are Supplied With the Wire?
A mill test certificate accompanies every lot, recording composition, heat number and lot number. Certificates of Conformity follow where the purchase order calls for them.
How Can I Buy Inconel 690 Filler Wire From Metracore Alloys Private Limited?
Metracore Alloys Private Limited quotes against diameter, form, quantity and applicable specification. Send those details to our sales desk.