Inconel Welding Electrode

Metracore Alloys supplies Inconel welding electrodes to teams fabricating nickel-alloy piping, pressure vessels, and reactor components. Nickel-chromium base metals need a filler that survives the same heat and corrosive service they were specified for. These electrodes join Inconel base metals without giving up strength in the weld zone. They resist oxidation and chloride stress corrosion cracking, and stay stable past 1000°C. Coating chemistry holds the arc steady through long passes. The core wire carries the alloy composition straight into the deposit, which is what keeps joints on Inconel 600, 625, and 718 intact through continuous thermal cycling.

The inconel welding rods deliver strong performance under extreme conditions. As a covered electrode, they handle temperature ranges from cryogenic levels up to 1800°F (982°C). They provide excellent resistance to pitting, crevice corrosion, and stress cracking. These electrodes are used for overlay cladding for pipelines, reactors, and vessels, as well as dissimilar joints between nickel-chromium-molybdenum alloys and stainless steels, carbon steels, or low alloy steels. Our inconel stick electrode is also used in marine, aerospace, and power generation projects where durability and resistance to aggressive media are critical.

We supply a wide range of grades to meet different welding requirements. Options include inconel 600 welding electrode, inconel 601 welding electrode, inconel 625 welding electrode, inconel 718 welding electrode, and inconel X750 welding electrode. Each grade provide unique benefits suited to its intended use, from high-strength aerospace parts to chemical processing equipment. Our precise manufacturing and process control ensure every electrode meet performance expectations. We also provide inconel filler rods to ensure versatility and consistency.

Every electrode undergoes quality tests to confirm strength, durability, and weldability. We supply products with proper test certificate and documentation for full traceability. Electrodes are packaged securely to protect them from moisture and damage during storage or travel. We ensure that products are delivered on time and handled carefully. Our welding electrode meet ANSI/AWS A5.11 ENiCrMo-3, ASME SFA 5.11 ENiCrMo-3, and F-43 international standards. As a reliable inconel welding electrode suppliers, we make sure customers receive products ready for demanding applications. For projects needing proven durability, choose certified inconel tig welding rod built for performance.

Inconel Welding Electrode Specifications

Every electrode we supply meets AWS A5.11/A5.11M and ASME SFA 5.11 classification. Electrode types like ENiCrFe-3 and ENiCrMo-3 set the coating and core composition for particular base metal combinations. Chemical composition sits at 58% minimum nickel and 20-23% chromium, with molybdenum and niobium controlled by grade. Tensile strength runs 550 to 750 MPa, elongation between 30% and 45%. Yield strength stays above 350 MPa, which gives the joint enough ductility for thermal expansion. Mill test certificates come with every batch.

Classification

Classification

AWS A5.11, A5.1, ENiCrFe-2, ENiCrFe-3, ENiCrCoMo-1

Types

Form

Welding Electrode,
Welding Rods

Type Of Current

Type Of Current

Direct Current Electrode Positive (DCEP)

Diameter

Diameters

2.5mm, Ø 3.2mm, Ø 4.0mm, Ø 5.0mm

Size

Size

2.0mm ∞ 5.0mm

AC/DC+

AC/DC+

50-80, 80-110, 100-135, 140-180

Welding Position

Welding Positions

All positions 5/32” & 3/16” recommended for use in flat & horizontal positions only (F, V, OH, H)

Ready Stock

Ready Stock

Coated Welding Electrodes,
Bare Welding Electrodes,
Shielded Arc Electrodes

Types of Inconel Welding Electrodes

Grade choice comes down to base metal, service temperature, and the corrosion environment. We stock the following for dispatch.

Monel 400 Coated Welding Electrodes

Inconel 600 Welding Electrodes

Bare Welding Electrodes

Inconel 625 Welding Electrodes

Shielded Arc Welding Electrodes

Inconel 718 Welding Electrodes

AWS Class ECuNi Coated Electrodes

Inconel X-750 Electrodes

Reach out to Metracore Alloys Private Limited for reliable Inconel Welding Electrodes solutions

Technical Details of Inconel Welding Electrodes

Diameter Chart of Inconel Welding Electrodes

Electrode Type Diameter (Inches) Diameter (MM)
6010 / 6011 3/32″ 2.4
6010 / 6011 1/8″ 3.2
6010 / 6011 5/32″ 4.0
6010 / 6011 3/16″ 4.8
6010 / 6011 1/4″ 6.4
6013 3/32″ 2.4
6013 1/8″ 3.2
6013 5/32″ 4.0
6013 3/16″ 4.8
7018 3/32″ 2.4
7018 1/8″ 3.2
7018 5/32″ 4.0
7018 3/16″ 4.8
7018 1/4″ 6.4

Size affects deposition rate, penetration depth, and how well the joint fits up. We stock several diameters to match plate thickness and welding position, whether you need an electrode for manual arc work or an inconel welding rod for TIG.

Diameter (mm)Diameter (inch)Standard Length (mm)Typical Application
2.43/32″300Thin sheet, root passes
3.21/8″350General fabrication
4.05/32″350Medium thickness plate
5.03/16″450Heavy section welding

Thinner diameters work for root runs and out-of-position welding. For thick-wall components, 4.0mm and 5.0mm cut down the number of passes needed.

Manufacturing Process of Inconel Welding Electrodes

Welding Electrode

Applications of Inconel Welding Electrodes

Standard carbon steel electrodes can’t survive the conditions nickel-alloy fabrication is used. That’s where these come in.

Exporter, Manufacturer & Supplier of Inconel Welding Electrodes in various material and sizes.

How to Choose the Right Inconel Welding Electrode

Start with base metal compatibility. Match the electrode’s core alloy to the parent material grade, otherwise you get dilution problems and the joint loses corrosion resistance. Corrosion resistance needed depends on the process fluid. Chloride-heavy environments need molybdenum-bearing grades like ENiCrMo-3, while dry heat service can work with simpler ENiCr grades. Operating temperature will tell you whether an age-hardening grade like Inconel 718 is necessary. Welding process matters too, since shielded metal arc, TIG, and submerged arc all need different coatings and diameters. Confirm your setup before placing a bulk order.

Inconel Welding Electrode Supplier

Metracore Alloys stocks the Inconel 600, 625, 718 & X-750 range, supplying 2.4mm to 5.0mm diameters in standard and export lengths. All shipments are quality tested and certified and mill test certificates and third party inspection documents are available on request. Packaging as per export standards, moisture resistant sealing for shipments on coast. We source directly for bulk and custom requirements, ensuring predictable lead times even for large contracts. Request a quote from our team based on the grade, diameter and quantity.

FAQs About Inconel Welding Electrodes

Which Inconel welding electrode is best for Inconel 600?

ENiCrFe-3 matches Inconel 600 base metal chemistry and works reliably in furnace and heat-treating equipment.

ENiCrMo-3 suits Inconel 625. The molybdenum content resists pitting and crevice corrosion in chloride-rich environments.

We stock 2.4mm, 3.2mm, 4.0mm, and 5.0mm diameters in 300mm to 450mm lengths, covering different joint thicknesses.

They meet AWS A5.11/A5.11M and ASME SFA 5.11 classification standards, verified through mill test certificates on every batch.

Scroll to Top