Inconel 600 Welding Electrodes Manufacturers & Suppliers
Inconel 600 welding electrodes are nickel-chromium based consumables used for joining Inconel 600 base material and for dissimilar metal welding involving nickel alloys. The alloy composition is built around approximately 72% nickel, 14-17% chromium, and 6-10% iron. This combination gives the weld deposits good oxidation resistance at high temperatures and reasonable resistance to aqueous corrosion.
These electrodes are used primarily in applications where the joint needs to retain properties at elevated temperatures. The deposits maintain mechanical integrity at temperatures up to around 1000°C depending on the exact service conditions.The standard classification for Inconel 600 welding electrodes falls under AWS A5.11: ENiCrFe-3. This is the most commonly requested grade in this category. Other applicable standards include ASME SFA 5.11. Some procurement documents also reference BS EN ISO 14172 depending on the end-use requirement.
Metracore Alloys Private Limited is a reputable supplier of welding electrodes. The Inconel Welding Electrode is available in standard electrode diameters of 2.5mm, 3.2mm, and 4.0mm. Length is typically 350mm. Custom lengths or specific lot size packaging can be arranged depending on order volume.
Applications of Inconel 600 Welding Electrodes and Inconel 600 Welding Wire
Oil and gas refineries use these electrodes for furnace components, reaction vessels, and heat exchanger tube sheet welding. Aerospace fabrication uses them for combustion chamber repairs and exhaust system work. Chemical plants requiring corrosion resistance at high temperatures also specify this grade regularly.
They are also used for cladding on carbon steel components where the weld overlay needs to withstand both heat and chemical exposure.
Reputed Supplier of Inconel 600 Welding Electrodes
Metracore Alloys Private Limited supplies Inconel 600 welding electrodes from reputed manufacturers. The material is sourced in compliance with the applicable AWS and ASME standards and comes with full documentation including MTCs and lot traceability.
Our company has been active in the welding consumables segment alongside its flanges and fasteners business. That background means our sales team understands technical queries and can assist with product selection without unnecessary back and forth.
Stock of standard diameters is generally available. Project-specific packaging and bulk lots can be arranged with reasonable lead times. Get in touch with Metracore Alloys Private Limited for pricing, availability, and documentation.
- Inconel 600 Welding Electrodes and Inconel 600 Welding Wire Specifications
- Types of Inconel 600 Welding Electrodes
- Technical Details of Inconel 600 Welding Electrodes
- Equivalent Grades of Inconel Alloy 600 Welding Electrode
- Chemical Composition of Inconel Alloy 600 Welding Electrode
- Mechanical Properties of Inconel Alloy 600 Welding Electrode
- Diameter Chart of Inconel 600 Welding Electrodes
- Manufacturing Process of Inconel 600 Welding Electrodes
- Inconel 600 Welding Electrodes Application
Inconel 600 Welding Electrodes and Inconel 600 Welding Wire Specifications
Classification
AWS A5.14 ERNiCr-3, AWS A5.11 ENiCrFe-3
Form
Welding Electrode,
Welding Rods
Type Of Current
Direct Current Electrode Positive (DCEP)
Diameters
2.5mm, Ø 3.2mm, Ø 4.0mm, Ø 5.0mm
Size
2.0mm ∞ 5.0mm
AC/DC+
50-80, 80-110, 100-135, 140-180
Welding Positions
All positions 5/32” & 3/16” recommended for use in flat & horizontal positions only (F, V, OH, H)
Ready Stock
Coated Welding Electrodes,
Bare Welding Electrodes,
Shielded Arc Electrodes
Types of Inconel 600 Welding Electrodes
Inconel 600 Coated Welding Electrodes
Inconel 600 Bare Welding Electrodes
Inconel 600 Shielded Arc Electrodes
Reach out to Metracore Alloys Private Limited for reliable Inconel 600 Welding Electrodes solutions
Technical Details of Inconel 600 Welding Electrodes
Equivalent Grades of Inconel Alloy 600 Welding Electrode
| Standard | Werkstoff Nr. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Chemical Composition of Inconel Alloy 600 Welding Electrode
| Element | Inconel 600 |
|---|---|
| C | 0.15 max |
| Mn | 1.00 max |
| Si | 0.50 max |
| S | 0.015 max |
| Cu | 0.50 max |
| Fe | 6 – 10 |
| Ni | 72.00 min |
| Cr | 14 – 17 |
Mechanical Properties of Inconel Alloy 600 Welding Electrode
| Element | Inconel 600 |
|---|---|
| Density | 8.47 g/cm³ |
| Melting Point | 1413 °C (2580 °F) |
| Tensile Strength | Psi – 95,000 , MPa – 655 |
| Yield Strength (0.2% Offset) | Psi – 45,000 , MPa – 310 |
| Elongation | 40 % |
Diameter Chart of Inconel 600 Welding Electrodes
| Electrode Type | Diameter (Inches) | Diameter (MM) |
| 6010 / 6011 | 3/32″ | 2.4 |
| 6010 / 6011 | 1/8″ | 3.2 |
| 6010 / 6011 | 5/32″ | 4.0 |
| 6010 / 6011 | 3/16″ | 4.8 |
| 6010 / 6011 | 1/4″ | 6.4 |
| 6013 | 3/32″ | 2.4 |
| 6013 | 1/8″ | 3.2 |
| 6013 | 5/32″ | 4.0 |
| 6013 | 3/16″ | 4.8 |
| 7018 | 3/32″ | 2.4 |
| 7018 | 1/8″ | 3.2 |
| 7018 | 5/32″ | 4.0 |
| 7018 | 3/16″ | 4.8 |
| 7018 | 1/4″ | 6.4 |
Manufacturing Process of Inconel 600 Welding Electrodes
Inconel 600 Welding Electrodes Application
FAQ's
What are Inconel 600 welding electrodes used for?
Inconel 600 welding electrodes are used for joining compatible nickel-chromium alloys in industrial equipment, chemical processing systems, heat exchangers, and high-temperature applications.
What is the difference between Inconel 600 welding wire and welding rods?
Inconel 600 welding wire is commonly used as filler material in wire-fed welding processes, while welding rods may refer to filler rods or stick electrodes, depending on the product type and welding method.
What are the key properties of Inconel 600 welding filler wire?
Inconel 600 welding filler wire is designed to provide suitable weld compatibility, oxidation resistance, and performance at elevated temperatures when used with appropriate base materials and welding procedures.
Which industries use Inconel 600 welding electrodes and filler wire?
These welding consumables are used in chemical processing, power generation, furnace equipment, heat exchangers, and other industrial applications requiring heat and corrosion resistance.
How do I select the right Inconel 600 welding electrodes?
Consider the base metal, welding process, operating temperature, corrosion conditions, electrode classification, and applicable welding standards to select suitable Inconel 600 welding electrodes or filler wire.
Products
Exporter, Manufacturer & Supplier of Inconel 600 Welding Electrodes in various material and sizes.