Titanium Grade 5 Bars
Titanium Grade 5, known industrially as Ti-6Al-4V, combines 6% aluminum and 4% vanadium with a titanium base to form the most widely used titanium alloy in structural applications. Metracore Alloys stocks it as a ready gr5 titanium bar for machining and fabrication. Strength-to-weight beats most stainless and nickel alloys, without the added mass. It works fine up to 400°C and does not lose its mechanical properties. These bars do not crack under chloride exposure, which matters for marine and chemical service where other alloys fail over time. Engineers specify this grade where you need structural strength plus long-term resistance to pitting and crevice corrosion in demanding environments.
Titanium Grade 5 Bar, Titanium Grade 5 Round Bar, Titanium Grade 5 Bar Stock
Titanium Grade 5 Round Bar Suppliers, Ti 6Al 4V Round Bar
Titanium Grade 5 Bar Specifications
Chemical composition for this gr5 titanium alloy steel bar runs 5.5–6.75% aluminum, 3.5–4.5% vanadium, 0.2% oxygen maximum, 0.3% iron, and the remainder titanium, per ASTM B348 and ASME SB348. Tensile strength reaches 895 MPa minimum with yield strength at 828 MPa and 10% minimum elongation. Metracore Alloys stocks bars conforming to AMS 4928 and AMS 4967 for aerospace applications. Diameters range from 5mm to 300mm in round, hex, and flat sections up to 6 meters, with custom cutting available on request.
Standard
ASTM B348 / ASME SB348
Dimensions
EN, DIN, JIS, ASTM, BS, ASME, AISI
Sizes in Stock
5 mm To 500 mm
Bars Process
Melting , Casting , Hot Rolling, Annealing, Pickling, Cutting
Form
Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
Tolerance
H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Thickness
100 mm To 3000 mm Long
Finish
Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Types of Titanium Grade 5 Bars
Metracore Alloys stocks a variety of bar forms to suit the machining, forging and fabrication needs of multiple industries.
Titanium GR 5 Square Bars
Titanium Grade 5 Hex Bar
Titanium Grade 5 Flat Bar
Titanium GR.5 Rectangular Bars
Titanium GR 5 Bright Bars
Titanium Grade 5 Round Bar
Reach out to Metracore Alloys Private Limited for reliable Titanium GR.5 Bars solutions
Technical Details of Titanium GR.5 Bars
Equivalent Grades of Titanium GR.5 Bars
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr 5 | 3.7165 | R56400 |
Titanium GR.5 Bars Chemical Composition
| Grade | C | N | O | H | Ti | Fe | V | Al |
| Titanium Gr 5 | 0.10 max | 0.05 max | 0.20 max | 0.015 max | bal | 0.30 max | 3.5-4.5 | 5.5-6.75 max |
Titanium GR.5 Bars Mechanical Properties
| Min.Tensile(KSI) | Min.Yield(KSI) | Hardness | Tensile Modulus | Poisson’s Ratio |
| 130 | 120 | 16.4 | 114 GPa | 0.30-0.33 |
Dimensions of Titanium GR.5 Bars
| US Bar | Metric | Japanese | ASTM/Canadian | ||||
|---|---|---|---|---|---|---|---|
| Diameter (inch) | Size | Diameter (mm) | Size | Diameter (mm) | Size | Diameter (mm2) | Size |
| 0.0375 | #3 | 5.05 | 55 | 10 | 10 | 200 | 15 |
| 0.0250 | #2 | 5 | 5 | 6 | 6 | 100 | 10 |
| 0.0500 | #4 | 6 | 6 | 13 | 13 | 300 | 20 |
| 0.0750 | #6 | 8 | 8 | 19 | 19 | 700 | 30 |
| 0.0625 | #5 | 7 | 7 | 16 | 16 | 500 | 25 |
| 0.0875 | #7 | 9 | 9 | 22 | 22 | 1000 | 35 |
| 1.0125 | #9 | 11 | 11 | 29 | 29 | 2500 | 55 |
| 1 | #8 | 10 | 10 | 25 | 25 | 1500 | 45 |
| 1.0375 | #11 | 14 | 14 | 35 | 35 | – | – |
| 1.0625 | #13 | 18 | 18 | 41 | 41 | – | – |
| 1.0500 | #12 | 16 | 16 | 38 | 38 | – | – |
| 1.0750 | #14 | 20 | 20 | 44 | 44 | – | – |
| 2 | #16 | 25 | 25 | 51 | 51 | – | – |
| 1.0250 | #10 | 12 | 12 | 32 | 32 | – | – |
| 1.0875 | #15 | 22 | 22 | 48 | 48 | – | – |
| 2.0250 | #18 | 28 | 28 | 57 | 57 | – | – |
| – | – | 36 | 36 | – | – | – | – |
| – | – | 32 | 32 | – | – | – | – |
| – | – | 40 | 40 | – | – | – | – |
| – | – | 50 | 50 | – | – | – | – |
| – | – | 44 | 44 | – | – | – | – |
Weight Chart of Titanium GR.5 Bars
| Size | kg/m | kg/ft | Size | kg/m | kg/ft | Size | kg/m | kg/ft |
|---|---|---|---|---|---|---|---|---|
| 22mm | 2.979 | 0.908 | 1/8″ | 0.062 | 0.019 | 3-1/4″ | 41.996 | 12.800 |
| 24mm | 3.543 | 1.080 | 4mm | 0.098 | 0.030 | 3-3/4″ | 55.780 | 17.001 |
| 7/8″ | 3.038 | 0.926 | 5/32″ | 0.095 | 0.029 | 3-1/2″ | 48.772 | 14.850 |
| 25mm | 3.871 | 1.180 | 3/16″ | 0.141 | 0.043 | 4″ | 63.340 | 19.306 |
| 26mm | 4.170 | 1.271 | 7/32″ | 0.190 | 0.058 | 4-1/2″ | 80.340 | 24.4487 |
| 1″ | 3.970 | 1.210 | 5mm | 0.154 | 0.047 | 4-1/4″ | 72.249 | 21.908 |
| 27mm | 4.490 | 1.368 | 6mm | 0.223 | 0.068 | 4-3/4″ | 90.249 | 27.366 |
| 30mm | 5.548 | 1.691 | 7mm | 0.298 | 0.091 | 5-1/2″ | 121 | 36.690 |
| 1-1/8″ | 5.033 | 1.534 | 1/4″ | 0.249 | 0.076 | 5″ | 99.940 | 30.461 |
| 1-1/4″ | 6.349 | 1.924 | 5/16″ | 0.387 | 0.118 | 6″ | 143.900 | 43.860 |
| 20mm | 2.470 | 0.753 | 3mm | 0.055 | 0.017 | 3″ | 35.762 | 10.900 |
| 1-3/8″ | 7.550 | 2.303 | 9mm | 0.498 | 0.152 | 7″ | 196 | 59.432 |
| 32mm | 6.314 | 1.894 | 8mm | 0.398 | 0.120 | 6-1/2″ | 167.630 | 51.093 |
| 35mm | 7.553 | 2.390 | 3/8″ | 0.557 | 0.170 | 7-1/2″ | 225 | 68.226 |
| 38mm | 8.903 | 2.792 | 11mm | 0.748 | 0.228 | 10″ | 397.140 | 121.048 |
| 36mm | 7.999 | 2.438 | 10mm | 0.620 | 0.189 | 8″ | 254.55 | 77.586 |
| 40mm | 9.872 | 3.009 | 12mm | 0.889 | 0.271 | – | – | – |
| 1-3/4″ | 12.179 | 3.712 | 13mm | 1.043 | 0.318 | – | – | – |
| 1-5/8″ | 10.449 | 3.200 | 1/2″ | 0.994 | 0.303 | – | – | – |
| 45mm | 12.555 | 3.807 | 14mm | 1.207 | 0.368 | – | – | – |
| 1-1/2″ | 8.951 | 2.715 | 7/16″ | 0.761 | 0.232 | – | – | – |
| 48mm | 14.205 | 4.330 | 15mm | 1.391 | 0.424 | – | – | – |
| 1-7/8″ | 13.977 | 4.260 | 9/16″ | 1.256 | 0.383 | – | – | – |
| 50mm | 15.414 | 4.698 | 5/8″ | 1.551 | 0.473 | – | – | – |
| 2-1/8″ | 17.963 | 5.475 | 17mm | 1.791 | 0.543 | – | – | – |
| 2″ | 15.906 | 4.848 | 16mm | 1.578 | 0.481 | – | – | – |
| 2-1/4″ | 20.128 | 6.135 | 11/16″ | 1.880 | 0.573 | – | – | – |
| 2-3/8″ | 22.435 | 6.838 | 3/4″ | 2.237 | 0.682 | – | – | – |
| 60mm | 22.205 | 6.768 | 18mm | 2.001 | 0.610 | – | – | – |
| 2-1/2″ | 24.856 | 7.576 | – | – | – | – | – | – |
| 2-3/4″ | 30.083 | 9.169 | – | – | – | – | – | – |
| 2-5/8″ | 27.409 | 8.354 | – | – | – | – | – | – |
Manufacturing Process of Titanium GR.5 Bars
Applications of Titanium Grade 5 Bars
Industries select Grade 5 bars where weight reduction cannot compromise strength or corrosion performance.
Products
Exporter, Manufacturer & Supplier of Titanium GR.5 Bars in various material and sizes.
Titanium Grade 5 Bar Suppliers
Metracore Alloys is a Gr 5 titanium bar supplier in India and export markets, serving fabricating shops, EPC contractors and machining units. Bulk orders shipped within 15-20 working days, or expedited on urgent timelines. Custom sizes outside standard mill sizes are cut to drawing specs with tighter tolerances than ±0.05mm for precision machining feedstock. Every batch ships with mill test certificates covering composition, mechanical testing, and radiographic or ultrasonic inspection, as required under ASTM and ASME.
Send your diameter, length, and certification requirement for a same-day quote.
Frequently Asked Questions About Titanium Grade 5 Bars
What is Titanium Grade 5 Bar used for?
Aerospace parts, marine shafts, chemical processing equipment, and medical implants, mainly use this grade for the strength-to-weight ratio and corrosion resistance.
What is the difference between Titanium Grade 5 and Grade 2?
Grade 5 has aluminium and vanadium added and reaches around 895 MPa tensile strength. Grade 2 is commercially pure titanium, closer to 345 MPa.
What is the chemical composition of Titanium Grade 5 Bars?
The composition consists of 5.5–6.75% aluminium, 3.5–4.5% vanadium, iron up to 0.3%, oxygen capped at 0.2%, titanium making up the rest, as per ASTM B348.
What are the mechanical properties of Titanium Grade 5 Round Bar?
The tensile strength of Titanium Grade 5 round bar is from 895 MPa, yield strength around 828 MPa, elongation at 10% minimum, hardness near 36 HRC when annealed.