Hastelloy® B-3® Coated Electrodes Manufacturers & Suppliers In India
Hastelloy® B-3® Coated Electrodes are welding consumables made for SMAW of Hastelloy B-3 alloy and similar steels. It resists strong acids, especially hydrochloric acid, across all concentrations and temperatures. With better thermal stability and stress corrosion resistance than B-2 alloys it gives reliable performance in tough environments. Its nickel-molybdenum base has a tensile strength of 100,000 psi and an elongation of 25%. Providing certified and superior products Metracore Alloys Private Limited is a reliable supplier of Hastelloy® B-3® Coated Electrodes.
Hastelloy® B-3® Coated Welding Electrodes - AWS A5.11 ENiMo-10
These electrodes meet AWS A 5.11 ENiMo-10 Coated Electrodes and ASME IX F-43 standards. It also matches UNS W80675 requirements. Our electrodes perform well in sulfuric, acetic, formic, and phosphoric acids. High ductility makes them safe during fabrication at shifting temperatures. They show smooth weldability, even in out-of-position welding. As Hastelloy® B-3® Coated Welding Electrodes, they are also used for cladding carbon and stainless steels, creating a corrosion-resistant surface without a buffer layer.
Hastelloy® B-3® Coated Welding Rods are widely used in chemical plants, oil and gas, petrochemical units, and power generation. It helps in building and repairing reactors, vessels and furnace components that face severe corrosion. Strong heat resistance and protection from pitting or cracking give them a longer service life. Our electrodes are made through wire preparation, flux coating and careful drying. This process ensures high arc stability and uniform weld quality every time.
Hastelloy® B-3® Covered Arc Welding Electrodes & Heavy Coated Electrodes - AWS A5.11 ENiMo-10 (UNS W80675)
Our Hastelloy® B-3® Covered Arc Welding Electrodes follow AWS A5.11 and ASME SFA 5.11 standards. Many are produced under ISO 9001 systems for assured quality. Customers receive Material Test Reports and Certificates of Conformance with each batch. We supply Hastelloy® B-3® Light Coated Electrodes and Hastelloy® B-3® Heavy Coated Electrodes in safe packaging to prevent moisture damage. Reliable stock and prompt supply make us the right choice for industries needing UNS W80675 Coated Electrodes with proven corrosion resistance.
- Hastelloy® B-3® Coated Electrodes Specification
- Types of Hastelloy® B-3® Coated Electrodes
- Technical Details of Hastelloy® B-3® Coated Electrodes
- Trade Names of HASTELLOY® B-3® Coated Welding Electrodes
- HASTELLOY® B-3® Coated Electrodes Minimal Chemical Composition
- HASTELLOY® B-3® Coated Electrodes Minimal Mechanical Properties
- Available Product Forms and Sizes HASTELLOY® B-3® Coated Electrodes
- Manufacturing Process of Hastelloy® B-3® Coated Electrodes
- Hastelloy® B-3® Coated Electrodes Application
Hastelloy® B-3® Coated Electrodes Specification
Classification
AWS A5.11, ENiMo-10
Form
Welding Electrode,
Welding Rods
Type Of Current
Direct Current Electrode Positive (DCEP)
Diameters
3/32”, 1/8”, 5/32”, 3/16” or 2.5mm, Ø 3.2mm, Ø 4.0mm, Ø 5.0mm
Size
2.0mm ∞ 5.0mm
AC/DC+
50-80, 80-110, 100-135, 140-180
Welding Positions
All positions 5/32” & 3/16” recommended for use in flat & horizontal positions only (F, V, OH, H)
Ready Stock
Light Coated Electrodes,
Heavy Coated Electrodes,
Shielded Arc Electrodes
Types of Hastelloy® B-3® Coated Electrodes
Hastelloy® B-3® Light Coated Electrodes
Hastelloy® B-3® Heavy Coated Electrodes
Hastelloy® B-3® Shielded Arc Electrodes
Reach out to Metracore Alloys Private Limited for reliable Hastelloy® B-3® Coated Electrodes solutions
Technical Details of Hastelloy® B-3® Coated Electrodes
Trade Names of HASTELLOY® B-3® Coated Welding Electrodes
| Class | UNS | Haynes |
| ENiMo-10 | W860675 | HASTELLOY® B-3® |
HASTELLOY® B-3® Coated Electrodes Minimal Chemical Composition
| Nickel | Balance |
| Molybdenum | 27.0-32.0 |
| Iron | 1.0-3.0 |
| Chromium | 1.0-3.0 |
| Cobalt | 3.0 max. |
| Tungsten | 3.0 max. |
| Manganese | 2.0 max. |
| Copper | 0.50 max. |
| Other | 0.50 max. |
| Silicon | 0.20 max. |
| Carbon | 0.02 max. |
| Sulfur | 0.03 max. |
| Phosphorus | 0.04 max. |
HASTELLOY® B-3® Coated Electrodes Minimal Mechanical Properties
| Tensile (psi) | 100,000 |
| Mpa | 690 |
| Elongation (%) | 25 |
Available Product Forms and Sizes HASTELLOY® B-3® Coated Electrodes
| Diameter in | 0.093 | 0.125 | 0.156 | 0.187 |
| Diameter mm | 2.40 | 3.20 | 4.00 | 4.70 |
| Length in | 10 | 14 | 14 | 14 |
| Length mm | 254 | 355.6 | 355.6 | 355.6 |
| Package Weight lbs. | 5 | 10 | 10 | 10 |
| Current (A) DCEP | 40-70 | 70-100 | 80-140 | 120-150 |
Manufacturing Process of Hastelloy® B-3® Coated Electrodes
Hastelloy® B-3® Coated Electrodes Application
FAQ's
What are Hastelloy B-3 coated electrodes?
Hastelloy B-3 coated electrodes are nickel-molybdenum-based welding consumables used for joining compatible alloys in industrial environments requiring resistance to reducing acids.
What is the AWS classification of Hastelloy B-3 coated electrodes?
Hastelloy B-3 coated electrodes are associated with the AWS A5.11 ENiMo-10 classification. Always verify the electrode manufacturer’s datasheet for the exact product designation.
What are the main properties of Hastelloy B-3 coated electrodes?
These electrodes are designed to produce weld deposits with corrosion resistance in suitable reducing environments, particularly those involving hydrochloric acid, subject to service conditions and weld compatibility.
Where are Hastelloy B-3 coated electrodes used?
They are used in chemical processing equipment, industrial piping, pressure vessels, and fabrication or repair work involving compatible nickel-molybdenum alloys.
How do I choose the right Hastelloy B-3 coated electrodes?
Consider the base metal, corrosive environment, welding position, required electrode classification, and applicable welding procedure. Consult the manufacturer’s technical data to confirm compatibility and performance.
Products
Exporter, Manufacturer & Supplier of Hastelloy® B-3® Coated Electrodes in various material and sizes.