Rene 41 Filler Wire

Metracore Alloys Private Limited supplies and exports Rene 41 Filler Wire to fabricators, aerospace subcontractors and turbine repair units across India and overseas markets. Our stock covers spooled wire, cut-length rods and coil. Rene 41 is a nickel-based precipitation-hardening superalloy under UNS N07041 and Werkstoff 2.4973. Chromium, cobalt, molybdenum, titanium and aluminium form the principal alloying additions, and the titanium-plus-aluminium pairing precipitates gamma prime, which carries load at temperature and holds usable strength through the 649°C to 982°C band. Consumable material is procured against AMS 5800 at a nominal 54Ni-19Cr-11Co-10Mo-3.2Ti-1.5Al-0.006B. Diameters between 0.508 mm and 3.17 mm cover TIG and MIG work. Send us your diameter, spool weight, and specification for a quotation.

Rene 41 Filler Wire Specification

Standard

Classification

AMS 5800 (no AWS A5.14 class)

Dimensions

Diameter

0.508 mm to 3.17 mm (0.020” to 0.125”)

Size

Size Range

Rods 900 mm & 1000 mm | Spools 1, 5 & 15 kg

Types

Form

Spool, Coil and Straight Length

Types of Rene 41 Filler Wire

Tig Filler Wire

Rene 41 TIG Filler Wire

Mig Filler Wire

Rene 41 MIG Welding Wire

Welding Filler Wire

Rene 41 Filler Rods & Welding Wire

Reach out to Metracore Alloys Private Limited for reliable Rene 41 Filler Wire solutions

Technical Details of Rene 41 Filler Wire

Chemical Composition of Rene 41 Filler Wire

Limits below follow the published range for UNS N07041. Verify heat values on the supplied MTC before you qualify the procedure.
Element Content (%)
Nickel (Ni) Balance
Chromium (Cr) 18.0 to 20.0
Cobalt (Co) 10.0 to 12.0
Molybdenum (Mo) 9.0 to 10.5
Titanium (Ti) 3.0 to 3.3
Aluminium (Al) 1.4 to 1.8
Iron (Fe) 5.0 max
Carbon (C) 0.06 to 0.12
Manganese (Mn) 0.10 max
Silicon (Si) 0.50 max
Boron (B) 0.003 to 0.01
PropertyDetails
High-temperature strengthCarries load through the 649°C to 982°C band
Creep resistanceDeformation stays low under sustained load
Stress-rupture strengthBoron at 0.003 to 0.01% lifts rupture life
Precipitation-hardening capabilityDeposit ages on the same cycle as the parent metal
Oxidation resistanceChromium at 18.0 to 20.0% builds the protective oxide layer
Thermal stabilityCobalt raises the gamma prime dissolution temperature
Relaxation resistanceHolds to roughly 815°C at low loads

Welding Processes of Rene 41 Filler Wire

Filler Wire Manu

Properties of Rene 41 Filler Wire

Six characteristics govern grade selection.

  • High-temperature strength. The alloy carries a load through the 649°C to 982°C band.
  • Creep resistance. Deformation stays low under sustained load, where solid-solution grades give way earlier.
  • Stress-rupture strength. Boron, held between 0.003 and 0.01%, segregates to the grain boundaries and lifts rupture life.
  • Precipitation-hardening capability. The deposit ages on the same cycle as the parent metal.
  • Oxidation resistance. Chromium at 18.0 to 20.0% builds the protective oxide layer.
  • Thermal stability. Cobalt raises the temperature at which gamma prime dissolves, resisting high-temperature deformation.

One caution applies. Rene 41 is sensitive to strain-age cracking, so thick restrained sections and multi-pass repairs on old materials require procedure qualification. Relaxation resistance holds to roughly 815°C at low loads.

Why Choose Metracore Alloys Private Limited for Rene 41 Filler Wire?

We stock Rene 41 filler wire across seven diameters in spool, coil and cut-length form, covering manual TIG repair through to automated GMAW production. Each lot arrives with chemical analysis verified against UNS N07041 limits and an MTC carrying heat and lot numbers. Sealed packaging protects the surface condition in transit. We despatch within India and export overseas, with bulk quantities handled against firm orders. Send your specifications and diameter list for a quotation.

Rene 41 Filler Wire Application

Rene 41 Filler Wire FAQs

What Filler Wire Is Used For Welding Rene 41?

Rene 41 welds with a matching-composition filler wire supplied to AMS 5800. A NiCrMo filler changes the cobalt and titanium content, so the joint won’t age like the parent metal.

Six properties matter: high-temperature strength to 982°C, creep resistance, stress-rupture strength, precipitation-hardening response, oxidation resistance from 18.0 to 20.0% chromium, and thermal stability.

Diameters range from 0.508 mm to 3.17 mm, with 0.8 mm, 1.2 mm, 1.6 mm, 2.0 mm and 2.4 mm ordered most often. Cut rods measure 900 mm or 1000 mm.

Rene 41 filler wire suits TIG welding as its primary process, with straight polarity and copper backing giving the heat control it needs.

MIG welding with Rene 41 wire works where deposition rate matters, provided a qualified procedure covers feed speed, shielding gas and interpass temperature.

Aerospace fabrication, aircraft engine repair, gas turbine hot sections and high-temperature fasteners account for most usage.

AMS 5800 covers the welding wire. UNS N07041 and W.Nr. 2.4973 identify the chemistry. There isn’t an AWS A5.14 or ISO 18274 classification for this alloy.

Orders ship with a mill test certificate to EN 10204.3.1 covering chemical analysis, dimensions and heat traceability. We issue a certificate of conformity on request.

Send your diameter, quantity, form and specification to our sales team, and we’ll confirm stock, price and lead time.

Exporter, Manufacturer & Supplier of Rene 41 Filler Wire in various sizes and forms.

Scroll to Top