Hastelloy X Filler Wire

Metracore Alloys Private Limited supplies, stocks and exports Hastelloy X filler wire in TIG rod, MIG spool and coil form to fabricators, turbine repair units and plant maintenance teams across India and overseas markets. Hastelloy X is a nickel-chromium-iron-molybdenum alloy designed for sustained high-temperature service, and the matching consumable is classified as ERNiCrMo-2 under AWS A5.14 and ASME SFA-5.14. UNS N06002 and W.Nr. 2.4665 identify the alloy.

Deposit chemistry sits near 47% nickel, 22% chromium, 18% iron, 9% molybdenum and 1.5% cobalt. Chromium builds the oxide film behind the oxidation resistance; molybdenum and tungsten hold creep strength at temperature, and the nickel matrix limits carburisation. X alloy keeps useful ductility after 16,000 hours at 650°C, 760°C and 870°C, and the matching filler lets the joint follow the parent metal through the same exposure. That is why engine builders specify the grade for combustion hardware.

TIG rods in 1.6 mm, 2.4 mm and 3.2 mm suit manual joining; MIG wire runs from 0.9 mm for mechanised deposition, and the coil reaches 4.0 mm. Aerospace exhaust systems, furnace internals and petrochemical fabrication account for most demand.

Every lot ships against a mill test certificate carrying a heat number and chemical analysis. Send us your diameter and quantity for the current stock position.

Hastelloy X Filler Wire Grade & Designations

Five designations appear on enquiries. Three identify the alloy and are used on both the wrought product and the filler metal; two apply only to the consumable.

Hastelloy X is the solid-solution-strengthened nickel-chromium-iron-molybdenum alloy. Buyers apply it to wrought products and filler metal alike.

UNS N06002 is the Unified Numbering System code, carried across ASTM B435 plate, B572 rod and B622 seamless tube, and quoted on the filler metal alongside ERNiCrMo-2.

W.Nr. 2.4665 is the German material number, listed alongside the designation NiCr22Fe18Mo.

ERNiCrMo-2 is a filler-metal classification, not a base-metal grade. Its “ER” prefix marks a bare rod and electrode usable for GTAW and GMAW.

AWS A5.14 and ASME SFA-5.14 fix composition, tolerances and packaging, and ASME Section IX groups the deposit under F-number 43.

Hastelloy X Filler Wire Specifications

Types

Product Type

TIG filler wire, MIG welding wire, filler rods

Dimensions

Grade & Designations

Hastelloy X — UNS N06002, W.Nr. 2.4665, ERNiCrMo-2

Size

Wire Diameter

0.9 mm to 4.0 mm

Standard

Standards

AWS A5.14 / ASME SFA-5.14 ERNiCrMo-2; AMS 5798

Hastelloy X Filler Wire Types

Four supply formats cover the working range: TIG filler wire, MIG welding wire, straight-length filler rods and general welding wire.

Tig Filler Wire

Hastelloy X TIG Filler Wire

Mig Filler Wire

Hastelloy X MIG Welding Wire

Welding Filler Wire

Hastelloy X Filler Rods

Welding Filler Wire

Hastelloy X Welding Wire

Hastelloy X TIG Filler Wire feeds manually into the arc, letting the welder set heat input and fill rate independently. Thin combustion liners and transition pieces depend on that control, and crack repair on turbine hardware relies on it too.

Hastelloy X MIG Welding Wire feeds continuously through the torch on spools, lifting deposition rates above manual GTAW. Longer seams justify the switch, and a clean drawn surface keeps the contact tip from wearing down.

Hastelloy X Filler Rods come as straight lengths in 914 mm (36 inch) and 1000 mm cuts, shipped in sealed tubs that keep the surface dry.

Hastelloy X Welding Wire handles joining and overlay duty on nickel-alloy components that operate hot. Fabricators use it for new builds; maintenance teams rebuild eroded sections with it.

Reach out to Metracore Alloys Private Limited for ready stock of Hastelloy X Filler Wire

Technical Details of Hastelloy X Filler Wire

Hastelloy X Filler Wire Specifications

Parameters we quote against appear below.

SpecificationDetails
MaterialNickel-based superalloy
GradeHastelloy X
UNSN06002
Werkstoff No.2.4665
Product TypeFiller wire / filler rod
Welding ProcessTIG (GTAW), MIG (GMAW)
Wire Diameter0.9 mm, 1.2 mm, 1.6 mm, 2.4 mm, 3.2 mm; coil to 4.0 mm
FormSpool, coil, straight length
Filler ClassificationAWS A5.14 / ASME SFA-5.14 ERNiCrMo-2
StandardsAWS A5.14, ASME SFA-5.14, ISO 18274, AMS 5798
SurfaceBright, drawn and cleaned
TestingChemical analysis, dimensional check, PMI, surface inspection
CertificationMill test certificate, certificate of conformity

Limits below follow AWS A5.14 for ERNiCrMo-2, which caps copper at 0.50% and drops the boron, aluminium and titanium requirements applied to wrought Hastelloy X.

ElementContent (%)
Nickel (Ni)Remainder
Chromium (Cr)20.50 – 23.00
Iron (Fe)17.00 – 20.00
Molybdenum (Mo)8.00 – 10.00
Cobalt (Co)0.50 – 2.50
Tungsten (W)0.20 – 1.00
Manganese (Mn)1.00 max
Silicon (Si)1.00 max
Carbon (C)0.05 – 0.15
Copper (Cu)0.50 max
Phosphorus (P)0.040 max
Sulphur (S)0.030 max

Chromium forms the chromia scale that slows oxidation in hot gas. Molybdenum and tungsten dissolve into the nickel lattice, raising creep resistance without precipitation hardening. Iron at 17.00 to 20.00% sits far above ERNiCrMo-3 and ERNiCrMo-4, which run only a few percent. That iron level lowers cost and aids weldability. Nickel, as the balance, carries carburisation resistance.

Six characteristics drive grade selection in high-temperature work.

  • Oxidation resistance: The chromia scale holds up in oxidising, reducing and neutral atmospheres.
  • High-temperature strength: Solid-solution alloying carries load without precipitation hardening.
  • Thermal stability: The alloy retains ductility after 16,000 hours at 650°C, 760°C and 870°C, and matching deposits carry the same solid-solution structure into the joint.
  • Carburisation resistance: High nickel content limits carbon pickup in furnace gas.
  • Weldability: The alloy welds without preheat, with interpass temperature held below 93°C.
  • Stress-corrosion cracking resistance: Deposits perform well in petrochemical service.

Hastelloy X Filler Wire Welding Processes

Two arc processes dominate, with dissimilar-metal joining as a third case. Submerged arc welding is not recommended on Hastelloy X, since high heat input and slow cooling increase weld restraint.

  • TIG / GTAW: Gas tungsten arc welding gives the tightest control over heat input. Thin combustion hardware and crack repair both call for that precision, with argon shielding and back purging protecting the deposit.
  • MIG / GMAW: Continuous feeding lifts deposition rates on heavier fabrication, and pulsed transfer keeps heat input in check. Qualify parameters through an approved procedure first.
  • Dissimilar metal welding: ERNiCrMo-2 deposits join solid-solution nickel alloys to nickel-iron-chromium alloys, and the class also covers welding to steel and stainless steel. Confirm metallurgical compatibility and service temperature first.
Filler Wire Manu

Hastelloy X Filler Wire Standards

Which standard governs an order depends on filler form, welding process, base material and service duty. Aerospace buyers work to AMS 5798; industrial buyers cite AWS or ISO.

  • AWS A5.14 / ASME SFA-5.14, class ERNiCrMo-2: composition, tolerances and packaging for bare nickel-alloy wire.
  • ISO 18274, designation S Ni 6002 (NiCr21Fe18Mo9): the European classification for the same wire and rod.
  • AMS 5798: the aerospace wire specification applied to turbine combustor work.
  • UNS N06002 and W.Nr. 2.4665: alloy codes quoted on certificates and drawings.
  • Customer specifications: extra testing or restricted-element limits agreed at order.
  • Weld metal: tensile values appear in the guidance annex of AWS A5.14 as typical figures, not as wire acceptance requirements. Tensile and bend testing belong to the procedure qualification of a welded coupon.

Why Choose Metracore Alloys Private Limited?

Metracore Alloys Private Limited stocks Hastelloy X filler wire in TIG, MIG and coil form from 0.9 mm to 4.0 mm, so short-notice requirements do not wait on a mill delivery. Material comes from established nickel-alloy producers and gets inspected on receipt, with chemical composition checked against AWS A5.14 limits before dispatch.

Every consignment carries a mill test certificate with heat and lot traceability. Spools, coils and straight lengths ship in sealed tubes or vacuum packs that protect the surface condition, whether the order goes within India or to an overseas fabricator. Bulk pricing and scheduled release orders suit project quantities. Send your diameter, quantity and certification requirements for a firm quotation.

Hastelloy X Filler Wire Sizes

Diameter follows joint thickness and process. TIG filler rods are available in 1.6 mm, 2.4 mm and 3.2 mm at 1000 mm straight lengths, tubed in 5 kg packs.

MIG welding wire ships on 15 kg precision-layer spools at 0.9 mm, 1.2 mm and 1.6 mm. Coil supply reaches 4.0 mm, with intermediate diameters against order.

Applications of Hastelloy X Filler Wire

Demand concentrates where components spend their working life above 600°C.

Aerospace and aircraft engine components take the largest share. Tailpipes, afterburner parts and nozzle vanes cycle through severe thermal gradients, and retained ductility prevents cracking there.

Gas turbines, combustion chambers and exhaust systems need weld metal matching the base alloy in creep strength. Land-based and aero turbines both use ERNiCrMo-2 for liner fabrication.

Power generation plants, industrial furnaces and chemical processing equipment take the same consumables for muffles, retorts and furnace rolls. Repair teams weld it into worn hot-section hardware, restoring original chemistry instead of a lower grade.

Hastelloy X Filler Wire FAQs

What Is The UNS Number Of Hastelloy X Filler Wire?

The UNS number is N06002, and the German material number is 2.4665. The matching filler metal classification is ERNiCrMo-2 under AWS A5.14.

Oxidation resistance, high-temperature strength, thermal stability, carburisation resistance, weldability and stress-corrosion cracking resistance define the grade. The chromia scale and the solid-solution nickel matrix provide the mechanism.

Standard diameters are 0.9 mm, 1.2 mm, 1.6 mm, 2.4 mm and 3.2 mm, with coil supply reaching 4.0 mm.

Yes. ERNiCrMo-2 carries a classification for gas tungsten arc welding, the preferred process for thin combustion hardware.

Spooled ERNiCrMo-2 wire works with gas metal arc welding where deposition rate matters. A qualified procedure sets the transfer mode.

Aerospace engine components, turbine combustors, furnace internals, petrochemical equipment and high-temperature repair cover most demand.

AWS A5.14 and ASME SFA-5.14 govern the classification. ISO 18274 lists it as S Ni 6002, and AMS 5798 applies to aerospace wire.

Each consignment carries a mill test certificate showing heat number, chemical analysis and classification. PMI reports come on request.

Share the diameter, form, quantity and applicable specification with our sales desk. We will confirm stock, certification scope and delivery schedule.

Exporter, Manufacturer & Supplier of Hastelloy X Filler Wire in various sizes and forms.

Scroll to Top