Inconel 718 Fasteners

Inconel 718 Fasteners are piping components that provide strength, precision, and durability. Metracore Alloys is a trusted inconel 718 fasteners manufacturers in India, providing these high-performance components made using advanced techniques like wire drawing, cold heading, insert tapping, heat treatment, and surface plating. These fasteners are made up of a nickel-chromium alloy blended with elements such as carbon, manganese, silicon, sulfur, copper, iron, and chromium. We ensure each step from inspection to packing is quality controlled for reliable products which are demanded worldwide.

Inconel 718 Fasteners Manufacturers in India, Inconel 718 Fasteners Manufacturers,, Inconel 718 Screws, Inconel 718 Fasteners Suppliers

Our UNS N07718 Alloy 718 Fasteners is available in various sizes to meet project needs. They come in dimensions from 3 mm to 200 mm, with bolt and screw sizes ranging from M3 to M56 or custom sizes when required. Washers are produced from M1 to M64. Lengths vary between M02 to M33, offering flexibility for diverse applications. These Nickel Alloy 718 Fasteners are widely used in aerospace, chemical processing, oil and gas, and marine engineering because of their ability to withstand stress, heat, and corrosion.

Known for their exceptional properties, inconel 718 fasteners perform in cryogenic conditions as well as continuous service up to 1200°F. The product range includes inconel 718 bolts, nuts, washers, anchor fasteners, stud bolts, eye bolts, threaded rods, cotter pins, socket screws, foundation fasteners, and other precision spares. Each type delivers specific functions across industries with superior mechanical strength. Inconel 718 hex bolts and nuts provide strong joint integrity, while inconel 718 screws ensure precise fitting. With a density of 8.2 g/cm³, a melting point of 1350°C, tensile strength of 135,000 psi and yield strength of 75,000 psi, these UNS N07718 Fasteners guarantee durability under extreme pressure and temperature.

Inconel 718 Fasteners, Inconel 718 Hex Bolts, Inconel 718 Nuts, Inconel 718 Bolts, ASTM B637 Inconel 625 Fasteners Stockist and Distributor

Every batch go through quality checks, including hardness, tensile, and dimensional accuracy tests, ensuring adherence to ASTM B637/ASME SB 637 standards. Certified with complete traceability, these fasteners are supplied with mill test reports and third-party inspections when required. Packaging is handled carefully to prevent damage during transport and maintain product integrity. As reliable inconel 718 fasteners suppliers, we deliver products that meet international standards. Choose our quality ASTM A1014 UNS N07718 fasteners engineered to perform with strength and reliability in the toughest conditions.

Get the Latest Price

Table of Content

Inconel 718 Fasteners Specification

Types of Inconel 718 Fasteners

Reach out to Metracore Alloys for reliable Inconel 718 Fasteners solutions

Technical Details of Inconel 718 Fasteners

Equivalent Grades of ASTM B637 Inconel 718 Fasteners

Standard	WNR	UNS	ASTM	ASME	DIN
Value	2.4668	N07718	B637	SB 637	2.4668

Chemical Composition of Inconel 718 Fasteners

Grade	Mn	Si	Ni	Cr	S	C	Cu
Inconel 718	0.35 max	0.35 max	50.00 – 55.00	17.00 – 21.00	0.015 max	0.08 max	0.30 max

Mechanical Properties Of Inconel 718 Fasteners

Element	Yield Strength (0.2%Offset)	Tensile Strength	Elongation
Inconel 718	Psi – 75,000, MPa – 482	Psi – 1,35,000, MPa – 930	45 %

Dimensions of Inconel 718 Fasteners

Nominal Size Diameter, D inch	Tap End Full Thread Length, BM			Minimum Nut End Full Thread Length, Bmin			Umax = 2P
Nominal Size Diameter, D inch	Nominal	Min.	Max.	L ≤ 10	10 < L ≤ 16	L > 16	UNC & NC-5 Thread	UNF Thread	8UN Thread
1 1/8	1.688	1.625	1.750	2.500	2.750	3.250	0.286	0.167	0.250
1 1/4	1.875	1.813	1.938	2.750	3.000	3.500	0.286	0.167	0.250
1 3/8	2.063	2.000	2.125	3.000	3.250	3.750	0.333	0.167	0.250
1 1/2	2.250	2.188	2.313	3.250	3.500	4.000	0.333	0.167	0.250
1 5/8	2.438	2.375	2.500	3.500	3.750	4.250	–	–	0.250
1 3/4	2.625	2.563	2.688	3.750	4.000	4.500	0.400	–	0.250
1 7/8	2.813	2.750	2.875	4.000	4.250	4.750	–	–	0.250
2	3.000	2.925	3.075	4.250	4.500	5.000	0.444	–	0.250
2 1/4	3.375	3.300	3.450	4.750	5.000	5.500	0.444	–	0.250
2 1/2	3.750	3.675	3.825	5.250	5.500	6.000	0.500	–	0.250
2 3/4	4.125	4.050	4.200	5.750	6.000	6.500	0.500	–	0.250
3	4.500	4.425	4.575	–	6.500	7.000	0.500	–	0.250
3 1/4	4.875	4.775	4.975	–	7.000	7.500	0.500	–	0.250
3 1/2	5.250	5.150	5.350	–	7.500	8.000	0.500	–	0.250
3 3/4	5.625	5.525	5.725	–	8.000	8.500	0.500	–	0.250
4	6.000	5.900	6.100	–	8.500	9.000	0.500	–	0.250
1/4	0.375	0.350	0.400	0.750	1.000	1.500	0.100	0.071	–
5/16	0.469	0.440	0.498	0.875	1.125	1.625	0.111	0.083	–
3/8	0.563	0.532	0.594	1.000	1.250	1.750	0.125	0.083	–
7/16	0.656	0.620	0.692	1.125	1.375	1.875	0.143	0.100	–
1/2	0.750	0.708	0.792	1.250	1.500	2.000	0.154	0.100	–
9/16	0.844	0.802	0.896	1.375	1.625	2.125	0.167	0.111	–
5/8	0.938	0.892	0.983	1.500	1.750	2.250	0.182	0.111	–
3/4	1.1.25	1.075	1.175	1.750	2.000	2.500	0.200	0.125	–
7/8	1.313	1.258	1.368	2.000	2.250	2.750	0.222	0.143	–
1	1.500	1.438	1.562	2.250	2.500	3.000	0.250	0.167	–

Weight Chart Of Inconel 718 Fasteners

*APPROX. WEIGHT IN KGS FOR 100 NOS*
SIZE	PLAIN PUNCHED WASHER IS:2016	HEAVY WASHER IS:6610	MACHINED WASHER IS:2016	SQUARE TAPER WASHERS				SPRING WASHER FLAT SECTION IS:3063-72	SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980	Size (Inches)	PLAIN PUNCHED WASHER BS:3410 TABLE 7
				MACHINED		HIGH STRENGTH FRICTION GRIP
				FOR CHANNELS IS:5372-75	FOR I-BEAM IS:5374-75	TYPE-B (CHANNELS) IS : 6649-85	TYPE-C ( I-BEAMS ) IS : 6649-85
M-3								0.01	0.01
M-4								0.02	0.02
M-5	0.04		0.04					0.03	0.03
M-6	0.11		0.11					0.08	0.04	1/4″	0.21
M-8	0.20		0.21	1.10	1.20			0.16	0.11	5/16″	0.35
M-10	0.39	1.60	0.40	1.00	1.10			0.25	0.20	3/8″	0.48
M-12	0.58	1.90	0.62	2.00	2.20	2.00	1.80	0.38	0.23	1/2″	1.07
M-14	0.82							0.60	0.38
M-16	1.06	2.90	1.13	3.40	3.75	9.00	8.50	0.89	0.59	5/8″	1.85
M-18	1.27							0.97	0.66
M-20	1.64	4.40	1.72	5.80	6.70	8.50	8.00	1.52	1.23	3/4″	2.91
M-22	1.75					7.50	7.00	1.65	1.36	7/8″	4.27
M-24	3.11	6.30	3.30	13.50	16.00	6.50	6.00	2.62	1.81	1″	6.13
M-27	3.94	8.00	4.23	12.50	15.00	12.00	11.50	2.87	2.06	1.1/8″	7.69
M-30	5.05	10.10	5.36	16.50	18.70	17.50	16.00	4.43	3.20	1.1/4″	9.90
M-33	7.10	12.00	7.54	21.00	23.50	23.00	22.50	6.30	3.50
M-36	8.73	14.60	9.20	25.50	29.20	26.50	26.00	6.73	5.25	1.1/2″	17.24
M-39	12.60	16.70	13.30	28.30	34.50			7.17	5.61
M-42	17.50	20.10	18.30					11.10	8.00
M-45	21.20	22.20	22.00					11.70	8.53
M-48	28.40	26.00	29.40					12.30	9.00	2″	27.78
M-52	31.90		33.00					18.20
M-56	47.90							19.30
M-60	51.60							20.30
M-64	55.40							21.80
M-68	57.40
M-72	63.40							24.00

Manufacturing Process of Inconel 718 Fasteners

Inconel 718 Fasteners Application

Exporter, Manufacturer & Supplier of Inconel 718 Fasteners in various material and sizes.